Meudy FCM-P Self-Priming Residue Dewatering Pump

The FCM-P self-priming residue dewatering pump is a light weight, self-priming pump, designed to operate both on surface and submerged.

The pump casing is made of aluminum alloy and rubber, making it light weight and wear resistant. Supplied with a 5-meter suction hose and a cast iron suction plate that fits closely to the ground, it can draw water down to ground level. The side water inlet features a rubber check valve to prevent backflow after the pump stops operating. During operation, water enters through the suction plate, flows through the suction hose, motor housing, and the water jacket, and is discharged from the top, providing maximum cooling efficiency for the motor. The discharge outlet can be installed either horizontally or vertically.

Application: Civil engineering, building sites, basement or other utility pits, rainwater and mud water

Specification :
1) PH : 6.5 to 8.5
2) Insulation class: F
3) Protection class: IP68
4) Cable length : 6m
5) Water temperature: up to 40°C
6) Max.water depth : 10m
7) Suction hose : 5m

FCM-480P

FCM-800P