Double Spindle Compound Machine ZXSM-45 / 45A

Double Spindle Compound Machine ZXSM-45 / 45A

Model: ZXSM-45
Motor (w) / Phase: 2200 / 3
Max. Drilling Capacity (mm): 45
Max. Tapping Capacity (mm): 40
Spindle travel (mm): 100
Distance spindle axis to column generating line (mm): 275
Max. Distance spindle nose to base (mm): 515
Spindle taper: MT3
Spindle speeds range (rpm): D:75~1200
Dimension of worktable surface (mm): 800 x 240
Overall Height (mm): 1820
G.W / N.W: 550/500

Model: ZXSM-45A
Motor (w) / Phase: 2200 / 3
Max. Drilling Capacity (mm): 45
Max. Tapping Capacity (mm): 40
Spindle travel: 120
Distance spindle axis to column generating line (mm): 275
Max. Distance spindle nose to base (mm): 665
Spindle taper: MT4
Spindle speeds range (rpm): D:75~1200
Dimension of worktable surface (mm): 1000 x 240
Overall Height (mm): 1970
G.W / N.W: 650/600

Features:
– The machine can tapping directly after drilling without changing tools, increase the efficiency.
– The machine can drill or tap several holes at one time, not only increase the efficiency, but also ensure different holes distance.
– To obtain different holes distance only need to adjust the distance between the spindles of multi-spindles, no needs to use many jig, and reduce the produce cost.
– The machine can work in with air-jig, fasten it, and the efficiency is very high, not only serve time but also energy.
– The lengthways travel of the table is air pressure auto feeding, save time but also energy and also improve the efficiency.
– It can process multi-holes, it can drill, ream, enlarge and tap the holes of different holes distance is very wide to adjusting the spindle of multi-spindles is very easy, the No. of the spindle can be changed according to the customer’s needs.
– It’s no needs to reinstall the workpiece to tapping after drilling you just have to pull table travel, then the work piece moves to the position of the tapping spindle to tapping.
– The machine can process multi-holes with the multi-spindles according to the customer’s demands or can drill, ream and tap only one hole without multi-spindles.